The steel structure has good plasticity and toughness, is light in weight, has high strength, is easy to disassemble and assemble, has a short construction period, is simple to operate, and can also protect the environment. The advantages of construction are very obvious.

1. Facade design

There are four basic characteristics in facade design: scale, line, color, and change. Steel structure workshop Compared with reinforced concrete structure factory buildings, lines are the most unique feature of light steel structure architectural style. Due to the unsatisfactory lighting effect of the roof, traditional reinforced concrete structure factory buildings usually design a large number of lighting windows, and a large number of lighting windows will destroy the line shape of the wall. The steel structure workshop will not suffer from this problem.

The light steel structure roof uses a large number of roof lighting panels, which not only has uniform lighting, but also does not damage the line shape of the wall. It is both applicable and beautiful. At present, it is very suitable for combined factory buildings, and by the way, it also solves the ventilation problem of the factory building. The facade design of the steel structure workshop is mainly determined by the process layout. The facade is required to be simple and grand, while being simple and unified to highlight the key points.

In order to highlight the key points of the plant structure, designers often use jumping colors and cool tones at the entrance of the plant, the outer gutter, or the place where the edge is flooded, which plays the role of finishing touch, and outlines the lightness and rich colors of the steel structure plant. , giving people a refreshing feeling.

2. Structural anti-corrosion design

The main components of steel are iron, iron oxide, ferric oxide, ferric oxide and other compounds, some of which are exposed to the air and will be oxidized and reduced by the air, which is called corrosion. Therefore, when there are corrosive media in the air of the steel structure workshop or the steel components are in a humid environment without corresponding protection measures for the steel structure, the corrosion of the steel structure workshop will become more obvious.

When the steel structure is slightly corroded, the steel will be deformed, such as changing the thickness of the steel member's section, or forming a rust pit layer on the surface of the member, etc., and even causing a large deformation of the steel member structure when it is serious. Therefore, attention should be paid to the design of steel structure workshops. Design issues for structural corrosion. Generally speaking, the anti-rust of steel structure buildings can be divided into two types: anti-rust of steel components and anti-rust of maintenance systems.

The anti-rust method of steel components is mainly to brush a layer of anti-rust paint on its surface, and the number and thickness of anti-rust paint are determined by the living environment of the component and the nature of the coating. The anti-corrosion of the maintenance system is the color plate part, and its surface coating treatment is completed by a professional manufacturer of color plates.

3. Arched roof support system design

In the design of the roof support system, the selection of the support system and the problem of roof waterproofing should be considered emphatically. Generally speaking, the design of the roof support system is related to factors such as the span, height, roof structure, crane setting and tonnage of the factory building, and in most cases, the roof structure with or without purlins should be designed as vertical support system. In the support system without purlins, although the large roof panel is welded to the roof truss at three points, it plays the role of upper chord support, but due to the limitation of construction conditions and the needs of installation, the roof with or without purlins should be on the upper chord of the roof truss and the skylight The upper chord is provided with an upper chord lateral support.

In the roof support design, the roof slope, single-slope roof length, and gutter form must be designed, because these factors directly affect the waterproof performance of the house. According to relevant regulations, the minimum roof slope is 5%. However, the specific situation needs to be adjusted accordingly according to the characteristics of different regions. The maximum temperature difference and the amount of rainfall where the factory building is located are important factors affecting the length of the single-slope roof of the factory building. However, in general, the length of the single-slope roof should be controlled within 70cm, and special treatment is required if it exceeds 70cm.

In short, the current design of steel structure workshops has become an important structural form in the field of construction. When we design steel structure workshops, we need to design and construct them scientifically and rationally, so as to ensure the safety of steel structure workshops and improve economic benefits.

Hangzhou FAMOUS Steel Engineering Co.,Ltd. (FASECbuildings) focus on the 2D/3D Modeling Design & Construction of various steel framed buildings, structural steel construction and building-related products supply like glass windows/doors, glass curtain wall s etc.

Under support of structural giant KNSN Group, FAMOUS received a lot of foreign projects from project Engineering, Fabrication, Construction, Logistic and Installation Guidance etc. and become more professional in foreign project operation, specially in US-EU standard engineering and proj ect management aspects. KNSN Group is a comprehensive group company dominated by steel structure fabrication and installation. If you are looking for steel structure workshop building solutions, please contact us.